Rubix IO: Power Requirements and Wiring
Power Supply Requirements
Power Supply Wiring
The IO Module is powered by a 24v AC or DC power supply on the `24 AC/DC POWER` terminals as shown below.
Rubix Compute: Power Requirements and Wiring
Warning: Power requirements are different for older models of Rubix Compute. To determine the device version of Rubix Compute, see: Rubix Compute: Identifying Hardware Version If Rubix Compute hardware is Version 0.8 or below, DO NOT FOLLOW the ...
Rubix Compute: Legacy Power Requirements and Wiring
WARNING: This article is intended for Rubix Compute devices version 0.8 and below. To determine the device version of Rubix Compute, see: Rubix Compute: Identifying Hardware Version Power Supply Requirements Power Supply Wiring Versions 0.8 and below ...
Edge iO 28: Power Requirements and Wiring
Power Supply Requirements Supply Voltage 24v AC/DC Current Requirement 700 mA Minimum Transformer Size 17 VA Power Supply Wiring The Edge28 can be powered by 24 volts AC or DC. The 0v wire from the power supply should be connected to the ...
Rubix IO: Getting Started Guide
Introduction to Rubix iO Modules Rubix iO Modules are Nube-iOs physical input/output devices. These compact and scalable physical IO devices are pure modbus and designed to integrate with the rest of the Nube Product Ecosystem, or with third party ...
Rubix IO: Modbus RS485 Wiring
Nube-iO Rubix IO Modules are a pure Modbus device; All communications with the IO Modules are via Modbus. This article will detail the correct wiring for the Modbus RS485 Network. To communicate via Modbus the Rubix IO Module must also have its ...