Nube-iO - Powering the Edge28 Controller

Edge iO 28: Power Requirements and Wiring


Power Supply Requirements

Supply Voltage
24v AC/DC
Current Requirement
700 mA
Minimum Transformer Size 
17 VA

Power Supply Wiring

The Edge28 can be powered by 24 volts AC or DC.  The 0v wire from the power supply should be connected to the 24v - terminal on the Edge28.  The 24v wire from the power supply should be connected to the 24v + terminal on the Edge 28.  The 24v - terminal (or power supply 0v) should be connected to the Earth/Ground of the system to avoid issues with mismatched reference (GND) voltages for connected sensors.
Wiring Diagram: 
                                          

 Applying voltages greater than 12v to the DI, UI, DO, UO, or GND terminals will cause permanent damage to the Edge28 circuitry. 



    • Related Articles

    • Rubix iO: Power Requirements and Wiring

      Power Supply Requirements Power Supply Wiring The IO Module is powered by a 24v AC or DC power supply on the `24 AC/DC POWER` terminals as shown below. Wiring Diagram: Related Articles Edge28: Power Requirements and Wiring Rubix Compute: Power ...

    • Rubix Compute: Power Requirements and Wiring

      Warning:  Power requirements are different for older models of Rubix Compute. To determine the device version of Rubix Compute, see: Rubix Compute: Identifying Hardware Version If Rubix Compute hardware is Version 0.8 or below, DO NOT FOLLOW the ...

    • Rubix Compute: Legacy Power Requirements and Wiring

      WARNING: This article is intended for Rubix Compute devices version 0.8 and below. To determine the device version of Rubix Compute, see: Rubix Compute: Identifying Hardware Version Power Supply Requirements Power Supply Wiring Versions 0.8 and below ...

    • Edge iO 28: Identifying Hardware Version

      The Nube-iO Edge28 controller has had a number of hardware improvements since its release.  It is important to know which version of the Edge28 you are working with so that the correct verions of manuals and documentation are used.  Using mismatched ...

    • Rubix iO: Installation and User Manual

      Please download the document attached below.