Nube iO - MicroEdge: Identifying Device Version

MicroEdge: Identifying Device Version


The Nube-iO Wireless MicroEdge sensor has had a number of hardware improvements since its release.  It is important to know which version of the MicroEdge you are working with so that the correct verions of manuals and documentation are used.  Using mismatched devices and documents can result in damage to the device or non-functional configurations.

Identifying Hardware Version

The MicroEdge hardware version is printed on the base PCB at the right side of the board just below the `NUBE iO` logo.   The front case of the MicroEdge must be removed to view the PCB and version number.  See diagram below.

  1. MicroEdge: Datasheet
  2. MicroEdge: Installation and Configuration

    • Related Articles

    • Droplet: Identifying Hardware Version

      The Nube-iO Wireless Droplet sensor has had a number of hardware improvements since its release.  It is important to know which version of the Droplet you are working with so that the correct verions of manuals and documentation are used.  Using ...
    • Rubix Compute: Identifying Hardware Version

      The Rubix Compute has had a number of hardware improvements since its release.  It is important to know which version of the Rubix Compute you are working with so that the correct verions of manuals and documentation are used.  Using mismatched ...
    • Edge iO 28: Identifying Hardware Version

      The Nube-iO Edge28 controller has had a number of hardware improvements since its release.  It is important to know which version of the Edge28 you are working with so that the correct verions of manuals and documentation are used.  Using mismatched ...
    • Droplet: Installation and User Manual

      Please download the document attached below.
    • MicroEdge: Installation and User Manual

      Please download the document attached below.