Rubix Platform: Access and Login
Rubix Platform is a browser-based user interface. It can be accessed on any supported web browser (Chrome, Firefox, Safari, Internet Explorer, ...) by entering the IP Address, and Port Number [1414] in the browser's URL address bar.
To open Rubix Platform first type in the IP address where Rubix Platform is running: this could be on a controller, a PC, or a web server. Next type a Colon [ : ]. Finally type the Port Number; the default port number for Rubix Platform is 1414. The URL Address should take the following form <IP Address>:<Port Number>
For example:
192.168.15.10:1414
Note: The IP Address or Port Number may be different if Rubix Platform is being accessed through a router or networking service with port forwarding enabled.
If the device's IP address is unknown try the following:
- If you are accessing Rubix Platform on a Nube-iO Rubix Compute controller try IP Address 192.168.15.10 with the ETH-2 ethernet port connected to your PC. OR connect the ETH-1 ethernet port to your router and check your router DHCP devices for the IP Address. For further information see Connecting to a Rubix Compute.
- Try to use an IP scanning tool such as Angry IP Scanner or Advanced IP Scanner to find the device's IP address.
- Contact a network administrator to check the networking details for the device running Rubix Platform.
Login with User Credentials
Once you have navigated to Rubix Platform, if you have not signed-in recently, a login screen will appear, prompting for a username and password.
Note: If the username and password have not been changed, they will be the default values. The default username is
admin and the default password is
N00BWires (note there are 2 Zeros in N
00B).
After successful login you will see the Rubix Platform user interface. To find out what to do next, please see
Navigating Rubix Platform or
Getting Started Guide: Rubix Platform
for more information.
Related Articles
- Rubix Platform: Updating Login Credentials
- Rubix Platform: Getting Started Guide
- Rubix Platform: Navigation
Related Articles
Rubix Wires: Access and Login
Enter the URL Address Rubix Wires is a browser-based user interface. It can be accessed on any supported web browser (Chrome, Firefox, Safari, Internet Explorer, ...) by entering the IP Address, and Port Number [1313] in the browser's URL address ...
Rubix Platform: Updating Login Credentials
At the current time, only the login password can be modified. The login username ('admin') is constant. Preparation Accessing Rubix Platform Updating Login Password Navigate to `Update Password` Menu: Select 'Update Password' from within the ...
Rubix Platform: Navigation
This article explains how to navigate the Rubix Platform browser based user interface. Knowing the names and locations of the common Menus, Buttons, and Panels available in Rubix Platform will help users understand the instructions/descriptions in ...
Rubix Platform: Overview
Introduction To Rubix Platform Rubix Platform is the browser based user interface for many of the Nube-iO services. Rubix Platform is the main management tool for configuring Local/Remote Device Settings, Sensor Gateway Connectivity, Data Management, ...
Rubix Platform: Getting Started Guide
Introduction To Rubix Platform Rubix Platform is the browser based user interface for many of the Nube-iO services. Rubix Platform is the main management tool for configuring Local/Remote Device Settings, Sensor Gateway Connectivity, Data Management, ...